| METALLURGICAL TESTING SERVICES | |
| ASTM E3 | Sample Preparation |
| ASTM A370 | Standard Test Methods for Mechanical Testing of Steel Products |
| ASTM E112 | Determining Average Grain Size |
| ASTM E407 | Microetching Metals and Alloys |
| ASTM E45 | Determining The Inclusion Content in Steel |
| ASTM B487 | Metal and Oxide Coating Thickness Measurement |
| ASTM E1077 | Estimating the Depth of Decarburization in Steel |
| SAE J423 | Case Depth Measurement |
| ASTM E381 | Macroetch Examination |
| FAILURE ANALYSIS | |
| ASTM E2332 | Investigation & Analysis of Physical Component Failures |
| ASTM E766 | Calibration of a Scanning Electron Microscope (SEM) |
| ASTM B748 | Thickness Measurements of Metallic Coatings by a SEM |
| ASTM E1508 | Quantitative Analysis by Energy Dispersive Spectroscopy |
| METAL CHEMICAL TESTING | |
| ASTM E415 | Chemical Analysis of Carbon and Low Alloy Steel by Optical Emission Spectrograph |
| ASTM A751 | Test Method and Practices for the Chemical Analysis of Steel Products |
| ASTM E1471 | Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers |
| ASTM E2371 | Analysis of Titanium and Titanium Alloys by DC Plasma and ICP Spectrometry |
| ASTM E1019 | Determination of Carbon, Sulfur, Nitrogen & Oxygen by Combustion & Inert Gas Fusion |
| ASTM E1409 | Test Method for the Determination of Oxygen and Nitrogen by Inert Gas Fusion |
| ASTM E334 | General Techniques of Infrared Microanalysis |
| E1232 | General Techniques for Obtaining Spectra For Qualitative Analysis |
| MECHANICAL TESTING LAB | |
| ASTM E8 | Uniaxial Tensile Testing on Metals at Ambient Temperature |
| ASTM E23 | Test For Notched Bar Impact Testing of Metals |
| ASTM E290 | Standard Test Method of Bend Testing of Material for Ductility |
| ISO 148-1 | Charpy V-Notch and U-Notch Pendulum Impact Test Method |
| ISO 148-2 | Charpy V-Notch and U-Notch Pendulum Impact Test Method |
| MECHANICAL TESTING LAB | |
| ASTM F606 | Mechanical Properties of Internally and Externally Threaded Fasteners |
| ASTM E190 | Guided Bend Test for Ductility of Welds |
| ASME Section IX, D1.1 | Bend Test and Tensile Testing of Welds |
| POLYMER LAB TESTING | |
| ASTM 1131 | Thermogravimetric Analysis |
| ASTM E1868 | Standard Test Method for Loss-on-Drying |
| ASTM E967 | Calibration of Differential Scanning Calorimeters & Differential Thermal Analyzers |
| ASTM E334 | General Techniques of Infrared Microanalysis |
| ASTM E1252 | General Techniques For Obtaining Spectra for Qualitative Analysis |
| ASTM D3418 | Transition Temperatures of Polymers by Differential Scanning Colorimetry |
| ASTM D3895 | Oxidation Induction Time of Polyofins by Differential Scanning Calorimetry |
| ASTM D4591 | Determining Temperatures and Heats of Transitions of Fluoropolymers |
| ASTM D5028 | Curing Temperatures of Pultrusions Resins by Differential Scanning Calorimetry |
| ASTM E794 | Melting and Crystallization By Differential Scanning Calorimetry |
| ASTM E1356 | Assignment of Glass Transition Temperaturesby Differential Scanning Calorimetry |
| ASTM D790 | Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM D2344 | Short-Beam Strength of Polymer Matrix Composite Materials and Laminates |
| NON-DESTRUCTIVE TESTING LAB | |
| ASNT SNT-TC-1A | Personnel Qualifications and Certification |
| ASTM E1417 (PT) | Standard Practice For Liquid Penetrant Testing |
| ASTM E1444 (MT) | Standard Practice For Magnetic Particle Testing For Aerospace |
| ASTM E1742 (RT) | Standard Practice For Radiographic Examination |
| ASTM E2422 (CR) | Standard Digital Reference Images For Inspection of Aluminum Castings |
| ASTM E2698 (DR) | Standard Practice For Radiological Examination Using Digital Detector Arrays |
| ASTM E2375 (NT) | Standard Practice For Liquid Penetrant Testing |
| AMS STD 2154 | Ultrasonic Inspection of Wrought Metals and Wrought Metal Products |
| MIL STD 271 (NDT) | Nondestructive Tests Used In Determining Surface and Internal Discontinuities In Metals |
| MSS SP137 (PMI) | Positive Material Identification of Metal Valves, Flanges, Fittings and Other Components |
Our Services
Metal Chemical Testing
Our chemistry laboratory has all skilled chemists with extensive experience within all metal…
01
Metallurgical Testing Services
The metallurgical engineers at ASAP Metal Testing are experienced with all metals and industries…
02
Metallurgical Engineering Lab
Metallurgical failure investigations is our specialty. Failed parts can hold up shipments…
03
Metal Failure Investigations
The sole purpose of a metal failure investigation is to identify a metallurgical opinion…
04
Polymer Lab Testing
All polymers are not the same. Depending on the type of plastic we solve polymer cracking…
05
Mechanical Testing Lab
Our mechanical testing laboratory at ASAP Metal Testing performs axial tensile testing, Charpy…
06
Non-Destructive Testing Lab
Our non-destructive testing (NDT) laboratory perform high volume and specialized inspections…
07
Specifications
Learn More